Operation of 9200, 9210 Remote Control
This remote control unit is not only able to operate the projector but
also usable as a wireless mouse for a PC. One pointing pad and two click
buttons are used for wireless mouse operation.
Wireless mouse is usable when PC mouse pointer is displayed on the
screen. When the menu or indicator of the projector is displayed on the
screen instead of the PC mouse pointer, the wireless mouse cannot be
used.
NOTE: To use the unit as a PC wireless mouse, connect
the projector to the PC with the attached cable. Signals from the
projector are transmitted to the PC, enabling the remote control unit of
the projector to be used as a PC wireless mouse. (Refer to "CONNECTING
THE PROJECTOR" for the connection).


- LAMP POWER ON/OFF BUTTON
Used to turn the projection lamp on or off.
- ZOOM BUTTON
Used to select power zoom lens adjust.
- FINE SYNC BUTTONS
Used to adjust fine sync.
- VOLUME BUTTONS
Used to adjust volume.
- FOCUS BUTTON
Used to select focus adjust.
- MENU BUTTON
This button will activate the MENU operation. Use this button, the POINT UP/DOWN/LEFT/RIGHT button and the SELECT (REAR CLICK) button to make adjustments to the projector's setting in MENU operation.
- NORMAL BUTTON
Use to reset to normal picture adjustment preset by factory.
- MODE BUTTON
Used to select video source. (Computer 1, Computer 2, Video 1 or Video 2 Input)
- SYSTEM BUTTON
Computer Mode
Use this button, the POINT UP/DOWN/LEFT/RIGHT button and the SELECT (REAR CLICK) button to select computer system.
VIDEO Mode
Use this button, the POINT UP/DOWN/LEFT/RIGHT button and the SELECT (REAR CLICK) button to select colour system.
- SOUND MUTE BUTTON
Used to mute sound.
- FREEZE BUTTON
Use this button to freeze on-screen image.
- POINTING PAD (POINT UP/DOWN/LEFT/RIGHT BUTTON)
When in use as a remote for the projector.
To select an item on the MENU that you want to adjust. To select an item, move the arrow by pressing the pad upward, downward, leftward or rightward.
Used to operate power zoom lens or power focus system by pressing the pad either upward or downward.
When in use as a wireless mouse
Used to move the pointer. The pointer is moved according to the direction you are pressing.
- FRONT CLICK BUTTON
This button has the same function as the right button in a PC mouse. Pressing this button does not affect any operation when in MENU mode.
- SELECT (REAR CLICK) BUTTON
When in use as a remote for the projector.
This button has different functions depending on when used. This button is used to execute the item selected, to increase or decrease the values in certain items such as CONTRAST or BRIGHTNESS.
When in use as a wireless mouse
This button has the same function as the left button in a PC mouse.
REMOTE CONTROL BATTERY INSTALLATION

USING THE REMOTE CONTROL UNIT
Point the remote control toward the projector (Receiver window) whenever pressing the buttons. Maximum operating range for the remote control is about 5m and 60 ° front and rear of the projector.
To insure safe operation, please observe the following precautions:
- Use (2) AA, UM3 or R06 type alkaline batteries.
- Change two batteries at the same time.
- Do not use a new battery with a used battery.
- Avoid contact with water.
- Do not drop the remote control unit.
- If batteries have leaked on the remote control, carefully wipe the case clean and load new batteries.