1. LAMP POWER INDICATOR
    Light is dim when the projector is on. Light is brightened when the projector is in stand-by mode.

  2. READY INDICATOR
    Light is green when projector lamp is ready to be turned on.

  3. TEMPERATURE WARNING INDICATOR
    Flashes red when internal projector temperature is too high.

  4. LAMP REPLACEMENT INDICATOR
    Light is orange when projection lamp is nearing end of service life.

  5. LAMP POWER ON/OFF BUTTON
    Used to turn projector on or off.

  6. FINE SYNC BUTTONS
    Used to adjust fine sync.

  7. VOLUME BUTTONS
    Used to adjust volume.

  8. ZOOM BUTTON
    Used to operate power zoom lens.

  9. FOCUS BUTTON
    Used to operate power focus system.

  10. MODE BUTTON
    Used to select video source.

  11. NORMAL BUTTON
    Used to reset to normal picture adjustment preset by factory.

  12. MENU BUTTON
    This button will activate the MENU operation. Use this button, the POINT UP/DOWN/LEFT/RIGHT buttons and the SELECT button to make adjustments to the projector's setting in MENU operation.

  13. SYSTEM BUTTON


  14. POINT UP/DOWN/LEFT/RIGHT BUTTONS


  15. SELECT BUTTON
    This button has different functions depending on when used. This button is used to execute the item selected, to increase or decrease the values in certain items such as CONTRAST or BRIGHTNESS.

  16. COMPUTER INPUT-1 TERMINAL
    Used to connect a computer to the projector.

  17. COMPUTER INPUT-2 TERMINAL
    Used to connect a computer to the projector.

  18. MONITOR OUTPUT TERMINAL
    Used to connect a monitor to the projector.

  19. COMPUTER AUDIO INPUT-1 JACK mini stereo type
    Used to connect a computer audio input to the projector.

  20. CONTROL PORT-1 CONNECTOR
    Used to connect a mouse cable to the projector.

  21. COMPUTER AUDIO INPUT-2 JACK mini stereo type
    Used to connect a computer audio input to the projector.

  22. CONTROL PORT-2 CONNECTOR (SERIAL PORT)
    Used to connect a mouse cable to the projector.
    NOTE: Control port-2 connector can be also be used as serial port.

  23. AUDIO INPUT-1 JACKS
    Used to connect an audio input to the projector.

  24. VIDEO INPUT-1 JACK
    Used to connect a video source to the projector.

  25. S-VIDEO INPUT JACK
    Used to connect a S-VHS video source to the projector

  26. AUDIO INPUT-2 JACKS
    Used to connect an audio input to the projector.

  27. VIDEO INPUT-2 JACK
    Used to connect a video source to the projector.

  28. EXT. SP. JACK (3.5 mm mini stereo type)
    Used to connect an external speaker system.