From David Hunter, Fri Jul 1 15:46:37 2005
OK, I installed the new ASK Proxima C410 projector in Workman 101 since
the old DP9270 was broken. Here are some notes on it:
- The input Computer 1 is DVI so we can not plug the
computer into it without a VGA to DVI adapter (and I am not
sure if that would work).
- The USB air-mouse only works with Computer 2, and the
PS/2 air-mouse only on Computer 3! As such, I plugged
the computer into the Computer 3 input.
- The projector seems to auto detect which inputs have a signal.
As such, if the computer is on and not in sleep mode, it will
set itself to Computer 3 when you power it up without
problem. However, when the computer changes the resolution (it
does this a lot when rebooting) the projector looses the signal
for about 0.5-seconds and will look for another signal. If the
VCR is off it will not find anything until the computer video
is back up. Then it will go back to showing the computer
image. However, if the VCR is on the projector will switch to
the VCR and not switch back until told to or the VCR is turned
off. I am sure that someday someone will leave the VCR on when
they are done. Then the next person will come in, power up the
projector, and tell the computer to switch from linux to
windows. When this happens the projector will switch to the