MT400


SPECIFICATIONS [ Features ][ Accessories ]

Tape TransportTape Type: C46-90 cassette tapes (Type II); Track Configuration:4-track/4-channel, One-way Record-Play; Tape Heads: 4-track Record-Play, Hard Permalloy x 1, 4-track Erase, Ferrite x 1; Motor: DC servo motor x 1; Tape speed: 4.8 cm/s, 9.5 cm/s; Pitch Control: Approximately + or - 10%; Wow and Flutter: 0.12% WRMS (9.5 cm/s); Rewind Time: Approximately 120 seconds for a C60 tape
MixerFrequency Response: 20 Hz - 20 kHz, +1/-4 dB, MIC IN-STEREO OUT, LINE IN - MONITOR OUT; S/N Ratio (at rated input and output levels): 65 dB/IHF-A, MIC IN - STEREO OUT (GAIN TRIM MAX), 70 dB/IHF-A, LINE IN - STEREO OUT (GAIN TRIM MIN); EQ: LOW/Shelving Basic Frequency: 80 Hz, Range: + or - 12 dB; MID/Peaking Basic frequency: 1 kHz, Range: + or - 12 dB; HIGH/Shelving Basic frequency: 12 kHz, Range: + or - 12 dB
RecorderOverall Frequency Response: 50 Hz - 14 kHz, +3/-5 dB (9.5 cm/s, NR OUT); Overall S/N Ratio: 80 dB/IHF-A (NR IN) at 3% distortion level; Overall Distortion: 2.0% (400 Hz, - 10 dB); Erasure Rate: 55 dB (1 kHz, 0 dB, BPF); Noise Reduction: dbx TYPE II
Connections: Number of I/O'sMIC/LINE x 4; INSERT I/O x 2; STEREO IN x 2; AUX SEND x 2; STEREO OUT L,R x 1; MONITOR OUT L,R x 1; SYNC OUT x 1; PHONES L,R x 1
I/O SpecificationsMIC/LINE Input Impedance: 10k ohm; Rated Input Level: -10 to -50 dB (CH fader at rated levels); Minimum Input Level: -56 dB (Gain trim max. CH fader max)
INSERT IN CH 1,2Input Impedance: 10 k ohm; Rated Input Level: -10 dB (CH fader at rated levels); Minimum Input Level: -16dB (CH fader max)
STEREO INInput Impedance: 10k ohm; Rated Input Level: -10 dB (CH fader at rated levels); Minimum Input Level: -16 dB (Volume max)
INSERT OUT CH 1,2Output Impedance: 100 ohm; Rated Load Impedance: 10 k ohm or higher; Rated Output Level: -10 dB (10 k ohm load)
STEREO OUT L,ROutput Impedance: 1 k ohm; Rated Load Impedance: 10 k ohm or higher; Rated Output Level: -10 dB (10 k ohm load)
AUX SENDOutput Impedance: 1 k ohm; Rated Load Impedance: 10 k ohm or higher; Rated Output Level: -10 dB (10 k ohm load)
MONITOR OUTOutput Impedance: 1 k ohm; Rated Load Impedance: 10k ohm or higher Rated Output Level: -10 dB (10 k ohm load)
SYNC OUTOutput Impedance: 1k ohm; Rated Load Impedance: 10 k ohm or higher; Rated Output Level: -10 dB (10 k ohm load)
PHONES (STEREO)Rated Load Impedance: 8 to 40 ohms; Rated Output Level: 30 mW + 30 mW (40 ohm load)
Control JackPUNCH I/O: Foot switch: FC5 (optional)
Power RequirementsDC 12V (650 mA or higher)
Dimensions (W x H x D)388 x 102 x 354 mm (15 1/4" x 4" x 13 15/16")
Weight2.8 kg (6.17 lbs.)

[ Features ][ Accessories ][ Locate a Dealer ]


* Features, Specifications and Accessories subject to change without notice


Yamaha Home | Product Locator | Dealer Locator | Press Releases | What's New
Musical Products | Professional Audio | Yamaha Accessories | Computer Products | Music Education
Consumer Electronics | Yamaha System Technology | Yamaha Factory Automation | Yamaha Motors USA
About Yamaha | Yamaha Worldwide | Service & Support | Special Services | Special Product Offers | Employment


--------------------------------------