4.1. The .grid() method

4.1. The `.grid()` method

To display a widget w on your application screen:

    w.grid(option=value, ...)

This method registers a widget w with the grid geometry manager—if you don't do this, the widget will exist internally, but it will not be visible on the screen.

Here are the options to the .grid() geometry management method:

`column`	The column number where you want the widget gridded, counting from zero. The default value is zero.
`columnspan`	Normally a widget occupies only one cell in the grid. However, you can grab multiple cells of a row and merge them into one larger cell by setting the `columnspan` option to the number of cells. For example, `w.grid(row=0, column=2, columnspan=3)` would place widget `w` in a cell that spans columns 2, 3, and 4 of row 0.
`in_`	To register `w` as a child of some widget `w₂`, use `in_=w₂`. The new parent `w₂` must be a descendant of the `parent` widget used when `w` was created.
`ipadx`	Internal x padding. This dimension is added inside the widget inside its left and right sides.
`ipady`	Internal y padding. This dimension is added inside the widget inside its top and bottom borders.
`padx`	External x padding. This dimension is added to the left and right outside the widget.
`pady`	External y padding. This dimension is added above and below the widget.
`row`	The row number into which you want to insert the widget, counting from 0. The default is the next higher-numbered unoccupied row.
`rowspan`	Normally a widget occupies only one cell in the grid. You can grab multiple adjacent cells of a column, however, by setting the `rowspan` option to the number of cells to grab. This option can be used in combination with the `columnspan` option to grab a block of cells. For example, `w.grid(row=3, column=2, rowspan=4, columnspan=5)` would place widget `w` in an area formed by merging 20 cells, with row numbers 3–6 and column numbers 2–6.
`sticky`	This option determines how to distribute any extra space within the cell that is not taken up by the widget at its natural size. See below.

If you do not provide a sticky attribute, the default behavior is to center the widget in the cell.
You can position the widget in a corner of the cell by using sticky=NE (top right), SE (bottom right), SW (bottom left), or NW (top left).
You can position the widget centered against one side of the cell by using sticky=N (top center), E (right center), S (bottom center), or W (left center).
Use sticky=N+S to stretch the widget vertically but leave it centered horizontally.
Use sticky=E+W to stretch it horizontally but leave it centered vertically.
Use sticky=N+E+S+W to stretch the widget both horizontally and vertically to fill the cell.
The other combinations will also work. For example, sticky=N+S+W will stretch the widget vertically and place it against the west (left) wall.

Tkinter 8.4 reference: a GUI for Python

4.1. The .grid() method

4.1. The `.grid()` method