Operating a projector classroom |  |
Operating a projector classroom | |
To play a DVD or VHS videotape, you must first select the VCR input on the projector, using the projector remote. See Section 3, “Remote controls for the projector”.
Use the power button on the DVD/VCR player to turn on the unit.
Use the button on the player to select either the VCR slot on the left or the DVD drawer on the right.
Load the media. For a VHS tape, push it into the slot on the left until it grabs the tape.
For a DVD, press the button on the right to open the drawer, place the DVD in the drawer, and press again to close the drawer.
Press the button to start playback.
If you are playing a VHS tape and see no picture, make sure the DVD/VCR player is set to channel L1. Press the buttons on the left side, labeled “∧” and “∨”, to move the selected channel number up or down. Pressing the “∧” button cycles the channel selection through L1, L2, C001, C002, …, C125, and back to L1.
Press the button when you are done.
To eject a VHS tape, press the button on the left side.
To eject a DVD, press the button on the right side.
To adjust the volume, use the volume control, a plain black knob located near the KVM.
When you are done, turn off the projector with the gold power button on the remote. When you press it once, a small menu appears on the screen; press again to confirm power off.